Advertisement
Step 3:
Insert the Detent Pin into the Top Block as shown below. Screw the first
two threads of the two Spring Plungers into the bottom of the Top lock
using small flathead screwdriver. Apply Loctite 243 to the remaining
threads of the spring plungers and continue to screw them in.
Detent Pin
Spring Plungers
Step 4:
Tighten the spring plunger furthest from the head of the Detent Pin
enough to hold the pin but loose enough to be able to removed with a
slight force. Tighten the second plunger enough to allow the Detent Pin
to move but not be removed.
Document No: 720900-1
This document and all copies are the property of Safeworks. All dimensions and data are indicative only.
Fully Seated
Spring Plunger
Issue Date: 2018-Sep-20
The user must ensure that the equipment complies with local rules and regulations.
Small gap
Revision: C
Loctite 243
on remaining
threads of
Spring Plungers
Page 11 of 13
Advertisement
