Advertisement
Step 3:
Place belt cutter jaws around elevator belt.
NOTE: Ensure belt lays flat between the between the top block and shear
ram holders.
Elevator Belt
Step 4:
Close the jaws around the belt and push the detent pin back in as shown
below.
Detent Pin
Document No: 720900-1
Issue Date: 2018-Sep-20
Revision: C
Page 5 of 13
This document and all copies are the property of Safeworks. All dimensions and data are indicative only.
The user must ensure that the equipment complies with local rules and regulations.
Advertisement
