Advertisement
Step 5:
Using a 19 mm (or 3/4") socket and impact wrench on the hex end of the
threaded rod, drive the belt cutter blade through the elevator belt.
Step 6:
Remove cut section of belt and reverse the impact wrench to return the
blade to the neutral position.
Document No: 720900-1
Issue Date: 2018-Sep-20
Revision: C
Page 6 of 13
This document and all copies are the property of Safeworks. All dimensions and data are indicative only.
The user must ensure that the equipment complies with local rules and regulations.
Advertisement
