Greiner Bio-One Sed Rate Timer 10/II User Manual page 10

15 minutes analysis time
N° Function
Switch
1 Enable 15' analysis time.
2 Enable 60' analysis time (works only if switch 1 = off)
3 Enable additional result formats (works only if switch 1 = off)
4 Enable temperature compensation
5 Enable the printer
6 Enable sedimentation curve graph
7 Enable the internal fan
8 Enable power supply on printer connector (DPT100 printer)
(where 'x' = don't care, has no effect)
30 minutes analysis time
N° Switch Function
1 Enable 15' analysis time.
2 Enable 60' analysis time (works only if switch 1 = off)
3 Enable additional result formats (works only if switch 1 = off)
4 Enable temperature compensation
5 Enable the printer
6 Enable sedimentation curve graph
7 Enable the internal fan
8 Enable power supply on printer connector (DPT100 printer)
SRT 10/II USER MANUAL
Position
ON
x
x
ON
ON
OFF
ON
ON
Position
OFF
OFF
OFF
ON
ON
OFF
ON
ON
page 10 of 37