Air Heaters - Leister LE 5000 DF Operating Instructions Manual

Operating Instructions
GB
Please read operating instructions carefully before use
and keep for future reference.

Air heaters

LE 5000 DF; LE 10 000 DF; LE 5000 DF HT, LE 10 000 DF HT
Application
The Leister LE 5000 DF, LE 5000 DF HT, LE 10 000 DF and LE 10 000 DF HT air heaters are suitable for
building into machines, installations or appliances and are designed for continuous operation.
Their most important applications include; drying and heating, thawing, accelerating and removal,
sterilising, smoothing, polishing, activation and dissolving, separating and fusing, shrinking, removal.
10
Warning
Danger of death when opening the device, as live parts and connections are
exposed. The device must be fully disconnected from the mains before opening it.
Danger of fire and explosion if air heaters are installed and used incorrectly,
especially in the vicinity of flammable materials and explosive gases.
Danger – can cause burns! Do not touch the heating element tube and nozzle
while they are hot. Allow the device to cool. Do not direct hot-air jet towards
people or animals.
Caution
The nominal voltage indicated on the device must correspond to the mains vol-
100
480
tage.
Devices of protection class I must be earthed with a protective earth conductor.
The device must not be left unattended when in use.
Heat can reach combustible materials which are out of sight. The device may only
be used by trained personnel or under their supervision. Children may not use
the device under any circumstances.
Keep away from wet and damp areas.