Front Cover - Follett Horizon Elite HCD1010RBT Installation Instructions Manual

Install front cover to ice machine.
8.1
Install condensing unit
• Complete installation of condensing unit
or connection to rack system.
• Required rack system capacity at 0 F
(–18 C) evaporator (EPR supplied by
installer).
1010N: 7,700 Btu/hr (1940 kcal/hr)
1410N: 10,000 Btu/hr (2519 kcal/hr)
Consult Operation and Service Manual provided with ice machine for sanitizing instructions.
Maestro, Micro Chewblet, Vision, Harmony, Ice Manager, Horizon, Horizon Elite are trademarks of Follett Products LLC.
Chewblet, RIDE, Follett are registered trademarks of Follett Products LLC.
NOTICE
Ice machine MUST be sanitized prior to operation!
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com

Front cover

8.2
Install ice machine front cover
➋
• Slide ice machine cover over machine
• Insert and tighten two screws through
cover and into docking assembly
8
➊
➊
➋
01113315R02
© Follet LLC 11/20