Advertisement
BLU-USB
Quick Start Guide
Included in the Box:
• BLU-USB Interface
• 4 Rubber Feet
• 2 Mounting Brackets
• 4 Fine-Threaded Screws for Mounting to Chassis
• 4 Coarse-Threaded Screws for Mounting to Surface
• 4 Washers for Mounting to Surface
• Cable Cover
• Power Supply with IEC Cable*
• USB Cable (2 Meter)
*Items not included with non-power supply models.
Warranty
For warranty information, visit http://bssaudio.com/en-US/
support/warranty_policy.
Product Registration
Register your product at http://bssaudio.com/en-US/
support/warranty_registration.
Download the Installation Guide
For additional information on mounting, installation, and
operation, download the installation guide at http://bssaudio.
com/en-US/products/blu-usb#documentation.
Scan QR codes with a mobile device to go straight to web URLs.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Harman BSS BLU-USB
Summary of Contents for Harman BSS BLU-USB
- Page 1 BLU-USB Quick Start Guide Warranty For warranty information, visit http://bssaudio.com/en-US/ support/warranty_policy. Included in the Box: Product Registration Register your product at http://bssaudio.com/en-US/ • BLU-USB Interface support/warranty_registration. • 4 Rubber Feet • 2 Mounting Brackets • 4 Fine-Threaded Screws for Mounting to Chassis • 4 Coarse-Threaded Screws for Mounting to Surface • 4 Washers for Mounting to Surface • Cable Cover • Power Supply with IEC Cable* • USB Cable (2 Meter) Download the Installation Guide For additional information on mounting, installation, and operation, download the installation guide at http://bssaudio. com/en-US/products/blu-usb#documentation. *Items not included with non-power supply models.
- Page 2 Install the Windows Driver Make Connections ® (If Applicable) If using a Windows computer, Class 1 (2 x 2) mode can be used without Connect the BLU-USB to the audio system. installing any drivers (this is the default mode). BLU link System or Device Computer To use Class 2 (8 x 8) mode, download and install the BLU-USB Windows Soundweb driver from http://bssaudio.com/en-US/products/blu-usb#downloads. See BLU link BLU link USB Port step 5 for additional details on modes. IMPORTANT! If using Windows 7, the Windows KB3033929 update (released March 2015) MUST be installed to use the BLU-USB in Class 2 mode. NOTE: Mac computers do not require any additional drivers and will use the Core Audio driver installed with OS X. Assign the Channel Banks Use the DIP switches to assign on-ramp Connect output of last device to input and off-ramp channel of first device for redundant operation.
Need help?
Do you have a question about the BSS BLU-USB and is the answer not in the manual?
Questions and answers