Chassis Q-Fan Control [Enabled] - Asus J3455I-CM-A Manual

CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to
set the appropriate performance level of the CPU fan.
[Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on
the CPU temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
[Turbo] Sets to [Turbo] to achieve maximum CPU fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set CPU Fan Profile to
[Manual].
CPU Upper Temperature
Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The CPU
fan will operate at the maximum duty cycle when the CPU temperature is higher than
the limit.
CPU Fan Max. Duty Cycle(%)
Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. When the CPU
temperature reaches the upper limit, the CPU fan will operate at the maximum duty
cycle.
CPU Middle Temperature
Use the <+> and <-> keys to adjust the CPU middle temperature.
CPU Fan Middle. Duty Cycle(%)
Use the <+> or <-> keys to adjust the CPU fan middle duty cycle.
CPU Lower Temperature
Use the <+> or <-> keys to adjust the lower limit of the CPU temperature. The CPU fan
will operate at the minimum duty cycle when the CPU temperature is lower than the
limit.
CPU Fan Min. Duty Cycle(%)
Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. When the CPU
temperature is lower than the lower limit, the CPU fan will operate at the minimum duty
cycle.
3.5.5

Chassis Q-Fan Control [Enabled]

[Disabled] Disables the Chassis Q-Fan control feature.
[Enabled] Enables the Chassis Q-Fan control feature.
Chassis Fan Speed Low Limit [600 RPM]
This item appears only when you enable the Chassis Q-Fan Control feature and allows you
to disable or set the chassis fan warning speed. Configuration options: [Ignore] [200RPM]
[300 RPM] [400 RPM] [500 RPM] [600 RPM]
Chapter 3: BIOS setup 3-15