Olivetti FL X1 User Manual page 7


multiple connector cable (Digital Output, WG IN, WG OUT,
RJ45, USB, RS485）to connect the device to the network and
to other devices, as detailed below:
Parte Nome
Network port
①
Power supply
②
USB
③
Digital output
④
Wiegand (WG) IN
⑤
Wiegand (WG) OUT
⑥
RS485
⑦
The KZ_OUT connector is normally used to connect the termoscanner to turnstiles or automatic
doors (see par. 2.4)

protective flap, to be possibily used when the thermoscanner is
located in an environment with direct exposure to sunlight.
The flap can be mounted on the thermoscanner simply by fitting it
from above, without fixing it
FL X1 User Manual
Descrizione
RJ45
DC12V IN
USB 2.0
A+/B-
vcc12V、GND、D0、D1
vcc12V、GND、D0、D1
RS485+ / RS485
Label
DC12V IN
KZ_OUT
WG IN
WG OUT
RS485+ / RS485
7