Polycarballoy Mix Module Kits - Graco A Series Instructions - Parts Manual

Polycarballoy Mix Module Kits

Polycarballoy Mix Module Part Numbering Code
Example First Two Digits
Part No.
MR3535 MR=Mechanical purge standard, round pattern
MF3535 MF=Mechanical purge standard, flat pattern
XR3535 XR=Mechanical purge direct impingement, round pattern
XF3535 XF=Mechanical purge direct impingement, flat pattern
*** Some modules have multiple impingement ports (see below). Size is given as the equivalence of a single port.
Standard Round Pattern Guns
Polycarballoy Mix No. of
Module Kit Impingement
(includes drill bits) Ports
MR3535 2
MR4747 2
MR5757 3
MR6666 4
MR8282 4
MR9494 4
Standard Flat Pattern Guns
Polycarballoy Mix No. of
Module Kit Impingement
(includes drill bits) Ports
MF1818 1
MF2929 1
MF3535 2
MF4747 2
MF5757 3
**For further information, see identification chart under Drill Bit Kits, page 47.
44
Impingement
Port Drill Bit
Size, nominal**
#73
#67
#67
#67
#60
#56
Impingement Counterbore
Port Drill Bit Drill Bit Size,
Size, nominal** nominal**
#77 #67
#69 N/A
#73 N/A
#67 N/A
#67 N/A
Second Two Digits Last Two Digits
35=Component A 35=Component B
impingement port impingement port
size (.035 in.).*** size (.035 in.).***
Parts
309856A