Changing Am Settings; Playing Other Sources; Changing Settings For The Other Sources; System Settings - Bose 3-2-1 Owner's Manual

Selection: AM setting options:
Sleep Timer:
Station:
Preset:
AM Status
Audio Setup
System Setup

Playing other sources

Selection: Setting options:
Sleep Timer:
VID 1, VID 2, AUX
Status:
Audio Setup
System Setup

System settings

Changing AM settings

What the setting affects:
Off Timer not set.
mm:ss Sets timer to turn off when time (01:00 to 90:00 minutes) expires. Refer to
"Using the sleep timer" on page 37.
---- Tunes to that station frequency.
1 of 25 Tunes to the stored preset station.
Available only if
presets include
an AM station
selection Displays information about the AM source.
selection See Sound Adjustments page 40.
selection See System Adjustments page 42.
Turn on any component connected to the media center by using the remote for that compo-
nent or controls on the component front panel.
Pressing AUX, Video 1 or Video 2 on the 3•2•1 or 3•2•1 GS system remote turns on the
system and selects the audio for that component. Be sure a tape or disc is loaded, as
needed.
Use the Volume ▲ or ▼ buttons on the 3•2•1 or 3•2•1 GS system remote control or on the
media center to raise or lower the volume of the system.
To control all other functions of that source, use its remote or front panel controls. For details
on what changes you can make, refer to the owner's manual that came with the component.
To record to a connected tape deck, play the built-in or connected source (AM/FM, CD, or
AUX) you want to tape. Listen to the speakers to be sure you have selected the audio you
want to tape. Set the tape deck to Record.

Changing settings for the other sources

What the setting affects:
Off Timer not set.
mm:ss Sets timer to turn off when time (01:00 to 90:00 minutes) expires. Refer to
"Using the sleep timer" on page 37.
selection Displays information about the connected source.
selection See Sound Adjustments page 40.
selection See System Adjustments page 42.
When necessary, the system settings can be changed using the System Settings menus. See
"Locating system settings" on page 42.
AM271966_00_V.pdf August 18, 2003
Operation
39