System Setup
Making the connections
Figure 9
Connection panel on the
rear of the media center
Connecting the 3•2•1 speakers
Figure 10
Connecting the speaker
cable to the media center
Figure 11
Pulling apart the left and
right strands of speaker
cable
14
The components of the 3•2•1 and 3•2•1 GS home entertainment systems are
connected through the media center, using custom cables supplied with the system. The
jacks on the rear of the media center are labeled (Figure 9), to help get everything hooked up
right the first time.
D
75
AM
FM
LOOP
ANTENNA
ANTENNA
OPTICAL
CAUTION: Do not plug the music system into an AC power (mains) outlet until all the
components are connected.
Additional cables
If additional audio cables or longer cables are needed to make these connections, contact
Bose. Before you call, refer to the list of offices included in the product carton.
1. Insert the single-plug end of the speaker cable into the SPEAKERS connector on the rear
panel of the media center (Figure 10). Tighten the screws on either side of the plug.
AUDIO INPUT
VIDEO
VIDEO
IDEO 2
AUX
INPUT
OUTPUT
D
D
L
L
L
C
OPTICAL
R
R
D
R
S
2. Grasp the two connectors at the other end of the speaker cable and pull the two strands
of cable apart as much as necessary to reach each speaker (Figure 11).
AUDIO INPUT
VIDEO
VIDEO 1
VIDEO 2
AUX
INPUT
OUTPUT
D
L
L
L
C
R
R
D
R
S
VIDEO
AUDIO
SPEAKERS
OUTPUT
C
L
ACOUSTIMASS MODULE
S
R
AM271966_00_V.pdf August 18, 2003
VIDEO
AUDIO
SPEAKERS
OUTPUT
C
L
ACOUSTIMASS MODULE
S
R