Bose 3-2-1 Owner's Manual page 20

System Setup
20
Selecting the correct video input on your TV
In order to play a DVD, your television must be set to receive signals from the correct video
input jack.
Most TVs have a TV/VIDEO, INPUT, or AUX IN button for selecting the video input. When
the TV is on, the words "VIDEO 1", "VIDEO 2", or "AUX" will usually appear in a corner of
the screen to indicate which video input is currently selected.
Before playing a DVD, locate the name of the video input jack (on the TV) that you have
connected the yellow video cable to, then turn the TV on and select the video input (on the
screen) that matches the name of that jack. If you are unable to locate the video input set-
ting on your television, please consult your TV owner's guide.
Turning off the internal speakers in your TV
When you listen to TV audio through your 3•2•1 home entertainment system, the speakers
in your TV should not be on. Use the on-screen menu on your TV to locate the setting for
INTERNAL SPEAKERS and select OFF. (Refer to your TV owner's guide for instructions).
Note: In some models, when the TV's internal speakers are turned off, you may need to turn
up the TV's volume setting by 75% to 100% in order to hear audio from the 3•2•1 home
entertainment system. (See your TV owner's guide for details.)
If your TV does not have an option to turn off the internal speakers, you may need to adjust
both the 3•2•1 system volume and your TV volume until you find a level that produces the
desired sound.
AM271966_00_V.pdf August 18, 2003