Installation; Build-In - Indesit Evolution 2005 Service Manual

2. INSTALLATION:

2.1. BUILT-IN:
The oven has a high-performance air flow system which gives remarkable results as long as the following
points are applied:
- The oven may be fitted either underneath a work top or in a suitable sized column unit.
- Cut a hole measuring 50 mm x 50 mm in the back wall for the electric cable to cross through (see
diagram below).
- Centre the oven in the unit and make that it is at least 2 mm from any other unit beside it.
- The cabinet must be made of heat-resistance material
- The oven must be disconnected from the power supply while it is being installed in the unit
- For greater stability, fix the oven in the unit with 2 screws in the holes on the side uprights.
Service Manual
Evolution - 2005
560
550
50
380
378
405
544
595
Edition
2005.03.39
20
386,5
Language
English
G
B
5