Chapter 1 - Operation; Controls; Joystick; External Jack Sockets - Sunrise Medical Magic Mobility R-net CJSM2 User Manual

Chapter 1 – Operation
1

CONTROLS

The Joystick Module is available with and without lighting control. The controls are common to both;
however, the lighting buttons symbols only appear on the lighting control version.
1.1

Joystick

The primary function of the joystick is to control the speed and direction of the wheelchair. The further you
push the joystick from the centre position the faster the wheelchair will move. When you release the joystick
the brakes are automatically applied.
1.2

External jack sockets

1.2.1 EXTERNAL ON/OFF SWITCH JACK
This allows the user to turn the control system on and off using an external switch, such as a Buddy-Button.
1.2.2 EXTERNAL PROFILE/MODE SWITCH JACK
This allows the user to perform the function of the Profile/Mode paddle using an external switch, such as a
Buddy-Button.
Alternative functions for this input are available via programming as described below:
CAUTION
The Joystick Module is supplied with rubber bungs that must be inserted into the Jack Socket when no
external device is connected.
5941A R-net CJSM2 User Guide DCR1266
magicmobility.com.au