Vex Robotics VEXnet Joystick Setup page 8

Setup
VEXnet Joystick Configuration
7. Power the Cortex and Joystick ON. After roughly 15 seconds, the ROBOT and VEXnet LED's
will blink green, indicating that the VEXnet communication link has been established.
End of Section: Creating a Wireless Link between the VEXnet Joystick and VEX Cortex
Your VEXnet Joystick and VEX Cortex can now communicate over the VEXnet USB Keys. Move on to
the next section to calibrate the values your VEXnet Joystick sends out.
© 2011 Carnegie Mellon Robotics Academy / For use with VEX Robotics Systems
in ROBOTC
(cont.)
7a. Turn the Cortex ON
7b. Turn the VEXnet Joystick ON
7c. Status LEDs
After roughly 15 seconds, the ROBOT and
VEXnet status LEDs will start quickly blinking
green. With the VEXnet link established, you
should power OFF your Cortex and VEXnet
Joystick to preserve battery.
VEX Cortex Configuration over USB
ROBOTC
• 7