Vex Robotics VEXnet Joystick Setup page 3

Setup
VEXnet Joystick Configuration
2. Connect the VEXnet Joystick to your computer using the USB A-to-A cable and turn it ON.
© 2011 Carnegie Mellon Robotics Academy / For use with VEX Robotics Systems
in ROBOTC
(cont.)
2a. Connect the VEXnet Joystick
Use the USB A-to-A cable to connect your
VEXnet Joystick to your computer.
Note: The VEXnet light should turn green.
2b. Turn the VEXnet Joystick ON
Switch the VEXnet Joystick to the ON postion.
Note: The Joystick light should turn green.
VEX Cortex Configuration over USB
ROBOTC
• 2