Vex Robotics VEXnet Joystick Setup page 4

Setup
VEXnet Joystick Configuration
3. Go to Robot > Download Firmware > VEXnet Joystick Firmware and select Standard File to
download the latest VEXnet Joystick Firmware to the controller.
3. Download Progress
A Download Progress window will appear and begin the download process. When the window
closes, the firmware download is complete.
Note: You only need to download the VEXnet Joystick Firmware once, when you first start using a
VEX Cortex with ROBOTC, or when you upgrade to a newer version of ROBOTC.
End of Section: Downloading Firmware to the VEXnet Joystick
Once the Download Progress window closes, the VEXnet Joystick Firmware download is complete.
Move on to the next section to learn how to create a wireless link between the VEXnet Joystick and
VEX Cortex.
© 2011 Carnegie Mellon Robotics Academy / For use with VEX Robotics Systems
in ROBOTC
(cont.)
VEX Cortex Configuration over USB
ROBOTC
• 3