Product Safety Information - Xantrex SOLAR CHARGE CONTROLLER 30 Owner's Manual

Product Safety Information

1. Before using the solar charge controller, read all instructions and
cautionary markings on the solar charge controller's components,
the batteries, and all appropriate sections of this guide.
2. Use of accessories not recommended or sold by the
manufacturer may result in injury to persons, a risk of electric
shock, or a risk of fire.
3. The solar charge controller is designed to be connected to your
DC electrical systems. The manufacturer recommends that all
wiring be done by a certified PV technician or electrician to ensure
adherence to the local and national electrical codes applicable in
your jurisdiction.
4. To avoid a risk of fire and electric shock, make sure that existing
wiring is in good condition and that wire is not undersized. Do not
operate the solar charge controller with damaged or substandard
wiring.
5. Do not operate the solar charge controller if it has been damaged
in any way.
6. This solar charge controller does not have any user-serviceable
parts. Do not disassemble the solar charge controller except
where noted for connecting wiring and cabling. See your
warranty for instructions on obtaining service. Attempting to
service the solar charge controller yourself may result in a risk of
electrical shock or fire.
7. To reduce the risk of electrical shock, disconnect all DC power
sources from the solar charge controller before attempting any
maintenance or cleaning or working on any components
connected to the solar charge controller.
8. Do not expose the solar charge controller to rain, snow, or liquids
of any type. This product is designed for dry-locations-use only.
Damp environments will significantly shorten the life of this
product and corrosion caused by dampness will not be covered
by the product warranty.
9. To reduce the chance of short-circuits, always use insulated tools
when installing or working with this equipment.
4 975-1012-01-01 Rev B
Oct 2019