Agilent Technologies 100 Operator's Manual page 14

2 Introduction
The 100 is designed to provide versatility and reliability, while meeting all current
USP testing requirements. Its three basket positions can be programmed to dip
together or independently, allowing up to three different tests to be run at the
same time. In addition to the standard six-tube USP-approved basket rack, a
variety of optional basket racks are available for large and bolus tablets. The 100
is used for disintegration testing in accordance with current USP requirements.
The optional built-in Report Center Printer provides hard-copy documentation of
the instrument operation for the highest degree of confidence.
The apparatus is fully programmable by simply entering the time duration of the
test. Baskets automatically lift from the beaker at the end of the test in the pass /
fail mode. The 100 also has individual digital time displays for each basket and
the water bath temperature is displayed continuously on the front panel.
C A U T I O N
14
Panels or covers that are retained by fasteners which require the
use of a tool for removal may be opened only by Agilent-trained,
Agilent-qualified, or Agilent-authorized service engineers. See
"Obtaining Warranty and Other Services" on page 52..
100 Operator's Manual