Advertisement
Install
4.
Ensure that the 4iiii Powermeter is up to date.
To do this, check that Bluetooth is enabled
on the phone then follow the proceeding
directions.
5.
Download the 4iiii app from the app store
BUT DO NOT CREATE A LOGIN.
6.
Record the ANT+ ID of the powermeter that
needs to be updated.
NOTE: The ANT+ ID is a 4 OR 5 digit number
located on the underside of the 4iiii sensor. If the
number is 4 digits, the first number of the ANT+
ID is zero (0).
Android
iOS
Page 2
620-8543 Rev. I
Advertisement
