Advertisement
Available languages
Available languages
• The pulsate rotates for
8 seconds to detect the
laundry load.
• Then the WATER LEVEL and
the amount of Detergent to
be used will be shown and
water will be supplied.
Close the lid
• Water will be
• When the wash
supplied for 2
program ends, the
minutes after the
buzzer will ring for
start of the wash
10 seconds before
to supplement the
the Power goes
water the laundry
off automatically.
has absorbed.
Finish
• If If water is already in the tub, or
putting wet laundry into the tub
before starting will increase the
WATER LEVEL.
• With light weight bulky loads, WATER
LEVEL can be set low.
• When setting the WATER LEVEL
manually, do not set to Medium to
prevent damage to laundry.
• Washing with HOT water may
damage the laundry (Water is set
to cold automatically). Ensure that
the load is under 2 kg.
• In order to avoid damage to laundry,
the spin cycle may appear slow. This
also avoids wrinkles and clothing
may still contain some water. This
is normal.
• When static pressure of water is
more than 2kgf/cm
Caution & Note
2
17
Advertisement
