How To Use - Hamilton Beach 40715 Use & Care Manual

How to Use

1. Make sure all three buttons are in the
OFF position (not pushed in) and that
the Steam Control Dial is turned fully
clockwise to NO STEAM ( ).
4. Holding handle securely, align raised dimple on the exterior of Espresso/Pod Filter
Holder with cutout notch on inside of Filter Holder. Rotate Espresso/Pod Filter Holder
180º to secure in base. Ensure no grounds are on rim of Filter Holder.
2. Fill the Removable Water Reservoir
with desired amount of cold water and
replace securely on the back of unit.
3. Place Ground Espresso Holder into Filter
Holder. Add one tablespoon (5 g) of ground
espresso for each cup being made. Use
shallow Holder for 1 cup (237 ml) and deep
Holder for 2 cups (474 ml). Press grounds
firmly into Holder with Tamping Tool.
5. Rotate the Filter Holder to the right until
it is firmly locked into place.
OR
Place pod into filter holder. When
using single-serve pod, always use the
shallower Espresso/Pod Filter Holder.
Never put two pods in either Filter Holder
at one time.
6. Plug into outlet. Press ON/OFF Button
to turn unit ON. When ready, the light
next to the Temperature Selection
button will come on.
7