How To Froth Milk - Hamilton Beach 40715 Use & Care Manual

How to Froth Milk

1. Ensure there is water in the Removable
Water Reservoir and move the Frothing
Nozzle to the right of the unit.
5. Fill a metal or ceramic cup 1/3 full with
cold milk. A stainless steel cup and
skim milk are recommended.
2. Plug into outlet. Press ON/OFF Button to
begin heating water. When heated, the
light next to Temperature Selection button
will come on.
6. Hold cup underneath Frothing Nozzle,
leaving about 1/4 to 1/2 inch between
the Nozzle and the bottom of the cup.
3. Press the Temperature Selection
button.
7. Rotate Steam Control Dial about
3/4 turn toward steam. Hold cup
under Frothing Nozzle until desired
consistency is reached. Froth should
be stiff and scoopable with a spoon.
4. Turn the Steam Control Dial clockwise
to NO STEAM ( ).
8. Turn Steam Control Dial to NO STEAM
( ). Press ON/OFF Button (light will go
off); then press Temperature Selection
Button again to turn off steam temperature.
Unplug from outlet. Clean the Frothing
Nozzle after each use.
11