Mcx623105A[C/N/S/E]-Vdat Specifications - Nvidia Mellanox ConnectX-6 Dx Series User Manual

MCX623105A[C/N/S/E]-VDAT Specifications
Physical Size: 5.59in. x 2.71in (142.00mm x 68.90mm)
Connector: Single QSFP56 Ethernet (copper and optical)
Data Rate:
Protocol
Ethernet: 200GBASE-CR4, 200GBASE-KR4, 200GBASE-SR4, 100GBASE-CR4, 100GBASE-
Support
KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-
SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,
10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-
KX, 10GBASE-SR
PCI Express Gen 3.0/4.0: SERDES @ 16.0GT/s, 16 lanes (2.0 and 1.1 compatible)
Voltage: 12V
Power
Power
Typical Power
(a)
Specifications
Maximum Power
Maximum power available through QSFP56 port: 5W (each port)
Voltage: 3.3Aux
Maximum current: 100mA
Temperature
Environmental
Humidity
Altitude (Operational)
Airflow Requirements
@ 55C
Safety
Regulatory
EMC
RoHS
a. Power numbers are provided for passive cables only. For board power numbers while using active
cables, please add the outcome of the following formula to the passive cables power numbers stated
above: Active_Module_Power x N umber_of_Modules x 1.1 (efficiency factor)
b. Typical power for ATIS traffic load.
c. For both operational and non-operational states.
d. Airflow is measured in wind tunnel.
e. Contact Mellanox for airflow numbers with other active modules' power levels.
Board Mechanical Drawing and Dimensions
Ethernet
Cable Type
(b) Passive Cables
Passive Cables
Operational
Non-operational
90% relative humidity
3050m
Passive Cable
(d)(e)
Active 4.55W
Cable
CB / cTUVus / CE
CE / FCC / VCCI / ICES / RCM
RoHS compliant
1/10/25/40/50/100/200 Gb/s
PCIe Gen 3.0
TBD
TBD
0°C to 55°C
-40°C to 70°C
(c)
Hot Aisle - Heatsink to Port
600LFM
950LFM
Gen 4.0
16.94W
24W
63