Hardware Installation; Safety Warnings; Installation Procedure Overview - Nvidia Mellanox ConnectX-6 Dx Series User Manual

Hardware Installation

Installation and initialization of ConnectX-6 Dx adapter cards require attention to the mechanical
attributes, power specification, and precautions for electronic equipment.

Safety Warnings


Safety warnings are provided here in the English language. For safety warnings in other
languages, refer to the
mellanox.com.
Please observe all safety warnings to avoid injury and prevent damage to system components. Note
that not all warnings are relevant to all models.
Unable to render include or excerpt-include. Could not retrieve page.

Installation Procedure Overview

The installation procedure of ConnectX-6 Dx adapter cards involves the following steps:
Step
1 Check the system's hardware and software
requirements.
2 Pay attention to the airflow consideration within the
host system
3 Follow the safety precautions
4 Unpack the package
5 Follow the pre-installation checklist
6 (Optional) Replace the full-height mounting bracket
with the supplied short bracket
7 Install the ConnectX-6 Dx and PCIe Auxiliary
connection cards in the system
8 Connect cables or modules to the card
9 Identify ConnectX-6 Dx in the system
Adapter Installation Safety Instructions
Procedure
document available on
Direct Link
Refer to System Requirements
Refer to Airflow Requirements
Refer to Safety Precautions
Refer to Unpack the package
Refer to Pre-Installation Checklist
Refer to Bracket Replacement
Instructions
Refer to Installation Instructions
Refer to Cables and Modules
Refer to Identifying Your Card
19