Mcx623102A[C/N/S/E]-Gdat Specifications - Nvidia Mellanox ConnectX-6 Dx Series User Manual

MCX623102A[C/N/S/E]-GDAT Specifications
Physical Size: 5.59in. x 2.71in (142.00mm x 68.90mm)
Connector: Dual SFP56 Ethernet (copper and optical)
Data Rate:
Protocol Support
Ethernet: 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4,
40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,
10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX,
1000BASE-KX, 10GBASE-SR
PCI Express Gen 3.0/4.0: SERDES @ 16.0GT/s, 16 lanes (2.0 and 1.1 compatible)
Voltage: 12V
Power
Power
Typical Power
(a)
Specifications
Maximum Power
Maximum power available through SFP56 port: 2.5W (each port)
Voltage: 3.3Aux
Maximum current: 100mA
Temperature
Humidity
Altitude (Operational)
Environmental
Airflow Requirements
@ 55C
Safety
Regulatory
EMC
RoHS
a. Power numbers are provided for passive cables only. For board power numbers while using active
cables, please add the outcome of the following formula to the passive cables power numbers stated
above: Active_Module_Power x N umber_of_Modules x 1.1 (efficiency factor)
b. Typical power for ATIS traffic load.
c. For both operational and non-operational states.
d. Airflow is measured in wind tunnel.
e. Contact Mellanox for airflow numbers with other active modules' power levels.
Ethernet
Cable Type
(b) Passive Cables
Passive Cables
Operational
Non-operational
90% relative humidity
3050m
Passive Cable
(d)(e)
Active 0.8 Cable
Active 2.5W Cable 500LFM
CB / cTUVus / CE
CE / FCC / VCCI / ICES / RCM
RoHS compliant
1/10/25/40/50 Gb/s
PCIe Gen 3.0 PCIe Gen 4.0
14.94W 15.76W
20.16W 20.98W
0°C to 55°C
-40°C to 70°C
(c)
Hot Aisle - Heatsink to Port
300LFM
400LFM
59