Specifications; Mcx621102A[C/E/N]-Adat Specifications - Nvidia Mellanox ConnectX-6 Dx Series User Manual

Specifications

MCX621102A[C/E/N]-ADAT Specifications

Physical Size: 5.59in. x 2.71in (142.00mm x 68.90mm)
Connector: Dual SFP28 Ethernet (copper and optical)
Protocol Data Rate:
Support
Ethernet: 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR,
10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR
PCI Express Gen 3.0/4.0: SERDES @ 16.0GT/s, 8 lanes (2.0 and 1.1 compatible)
Voltage: 12V
Power
Power
Typical Power
Specificatio
(a)
ns
Maximum Power
Maximum power available through SFP28 port: 1.5W (per port)
Voltage: 3.3Aux
Maximum current: 100mA
Environmen Temperature
tal
Humidity
Altitude (Operational)
Airflow Requirements @ 55C
Regulatory Safety
EMC
RoHS
a. Power numbers are provided for passive cables only. For board power numbers while using active
cables, please add the outcome of the following formula to the passive cables power numbers stated
above: Active_Module_Power x N umber_of_Modules x 1.1 (efficiency factor)
b. Typical power for ATIS traffic load.
c. For both operational and non-operational states.
d. Airflow is measured in wind tunnel.
e. Contact Mellanox for airflow numbers with other active modules' power levels.
(b)
(d)(e)
Ethernet
Cable
Passive Cables
Passive Cables
Operational
Non-operational
(c)
90% relative humidity
3050m
Cable Type
Passive Cable
Active 0.8W Cable
Active 1.5W Cable
CB / cTUVus / CE
CE / FCC / VCCI / ICES / RCM
RoHS compliant
1/10/25 Gb/s
PCIe Gen 3.0 PCIe Gen 4.0
10.88W 11.29W
15.55W 15.96W
0°C to 55°C
-40°C to 70°C
Hot Aisle - Heatsink to Port
200LFM
400 LFM
450LFM
57