Mcx623102A[C/N]-Adat Specifications - Nvidia Mellanox ConnectX-6 Dx Series User Manual

MCX623102A[C/N]-ADAT Specifications
Physical Size: 5.59in. x 2.71in (142.00mm x 68.90mm)
Connector: Dual SFP56 Ethernet (copper and optical)
Data Rate:
Protocol
Ethernet: 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-
Support
CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR
PCI Express Gen 3.0/4.0: SERDES @ 16.0GT/s, 16 lanes (2.0 and 1.1 compatible)
Voltage: 12V
Power
Power
Typical Power
Specifications
(a)
Maximum Power
Maximum power available through SFP56 port: 2.5W (each port)
Voltage: 3.3Aux
Maximum current: 100mA
Temperature
Humidity
Altitude (Operational)
Environmenta
l
Airflow Requirements @ 55C
Safety
Regulatory
EMC
RoHS
a. Power numbers are provided for passive cables only. For board power numbers while using active
cables, please add the outcome of the following formula to the passive cables power numbers stated
above: Active_Module_Power x N umber_of_Modules x 1.1 (efficiency factor)
b. Typical power for ATIS traffic load.
c. For both operational and non-operational states.
d. Airflow is measured in wind tunnel.
e. Contact Mellanox for airflow numbers with other active modules' power levels.
(b)
(d)(e)
Ethernet 1/10/25 Gb/s
Cable Type PCIe Gen 3.0
Passive Cables 14.87W
Passive Cables 18.92W
Operational 0°C to 55°C
Non-operational -40°C to 70°C
(c)
90% relative humidity
3050m
Cable Type Hot Aisle - Heatsink to Port
Passive Cable 300LFM
Active 0.8 Cable 400LFM
Active 2.5W Cable 500LFM
CB / cTUVus / CE
CE / FCC / VCCI / ICES / RCM
RoHS compliant
PCIe Gen 4.0
15.68W
19.74W
58