Williams Sound SoundPlus WIR 238 User Manual page 9

Compatible with:
RX237
-or-
RX238
-or-
RX239
Compatible with:
RX237
-or-
RX238
S 3 (
TEP CONTINUED
If an RCA connection is unavailable, use the provided
TV MICROPHONE
Plug in the microphone into the Mic Jack on the rear of the
TX238 Transmitter
the microphone near the loudspeaker
The microphone will allow you to play the TV at lower volume
for other listeners and will pick up other important sounds like
the telephone or doorbell ringing.
2.3 MHz (MONO) OPERATION:
Connect the LEFT RCA plug from the TV or
VCR audio output into the LEFT RCA jack on the
TX238 Transmitter
left unplugged). Next, slide the stereo/mono
switch to the "
mitter is now set for 2.3 MHz operation.
2.8 MHz (MONO) OPERATION:
Connect the LEFT RCA plug from the TV or VCR
speaker output into the RIGHT RCA jack on the
TX238 Transmitter
unplugged). Next, slide the stereo/mono switch
to the " " mono position. The transmitter is now
set for 2.8 MHz operation.
):
5
to pickup the desired sound source.
4
. Use the velcro strip supplied to attach
®
3
(the right jack should be
2
" mono position
3
(the left jack should be left
4
of your TV or stereo.
. The trans-
2
9