Hardware Overview - Aruba 560 Series Installation Manual

Hardware Overview

Figure 1
LED
The 560 Series access point is equipped with one LED that indicates the system status of the access point.
Table 1
LED
System LED
2
560 Series Access Point
USB Console Port, Reset
button and LED
560 Series LED Meanings during Boot Up
Color/State
Off
Red
Green - Flashing
Green - Steady
Green - Yellow, 6 seconds
period
Air Vent
Meaning
No power to AP
Initial power-up
AP booting, not ready
AP ready and Gigabit Ethernet connected. The LED turns off
after 1200 seconds
AP ready and 10/100Mbps Ethernet link established. The LED
turns off after 1200 seconds
Aruba 560 Series Outdoor Access Points
Ethernet Port Grounding Point
| Installation Guide