Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for dymax UVC-5
Summary of Contents for dymax UVC-5
- Page 1 UVC-5 Light-Curing Conveyor User Guide...
- Page 2 Please note that most dispensing and curing system applications are unique. Dymax does not warrant the fitness of the product for the intended application. Any warranty applicable to the product, its application, and use is strictly limited to that contained in the Dymax standard Conditions of Sale.
-
Page 3: Table Of Contents
Contents Important Information Before Initial Start-Up and Operation ................. 3 General Information ................3 General Safety Considerations ............3 Transport and storage ............... 4 1. Important General Information ........4 1.1 Scope of Delivery ................. 4 1.2 Responsibilities ................4 1.2.1 Responsibilities of the manufacturer ........ -
Page 4: Important Information Before Initial Start-Up And Operation
We do not assume any liability for any consequential damage. These operating instructions are intended for users. Dymax Europe GmbH reserves the right to make The system operator must make sure that the modifications without prior notice. All rights connection to the power supply is made correctly. -
Page 5: Transport And Storage
Dymax Europe GmbH. The signed declaration of conformity is a part of this Store the device in a dry place protected from the operating manual, the CE mark has been placed effects of the weather. -
Page 6: Responsibilities Of The System Operator
(such as the emergency stop switch) operation training. must be checked regularly before starting work. To create a risk assessment, Dymax Europe recommends reading the brochure "Risk • Wear your personal protective equipment (e.g. assessment - hazard catalog" (A017 (BGI... -
Page 7: Service Support
1.6 Service support Whenever service is needed, please send your technical Support Contact Information: questions directly to the manufacturer or to your distribution Dymax Europe GmbH partner. Kasteler Str. 45 Please keep the device number and software version ready in... -
Page 8: Device Description
2. Device description 2.1.2 Lamp unit A UV bulb with a power of max. 140 W/cm is used 2.1 Overall design as radiation source. The lamp unit is provided with integrated excess temperature protection which The mini UV laboratory dryer consists of a lamp unit switches the system off in case of insufficient lamp (Fig. -
Page 9: Safety Instructions
3. Safety instructions Spectra of the UV bulbs Most of the UV bulbs used emit approx. 30% UV The mini UV laboratory dryer BE 7 complies with radiation, 15% visible light and 55% infrared (heat). the state of the art and recognized safety rules. The UV radiation is emitted in different spectra. -
Page 10: Mercury
3.1.3 Effect of the UV radiation on the association "Risk of damage to the eyes", edition 07/2002. Long-wave UV radiation is absorbed almost exclusively by the lens body. A part 3.1.4 Protective measures of it can get into and affect the posterior In general, protective measures against UV eye chamber. -
Page 11: General Electrical Hazards
3.3 General electrical hazards Danger area Danger group Consequences Danger source Electric arc; live components; short- Switch room Electrical hazards Burns circuit; overload Lethal electrical shock Parts which have become electrically live due to faults In general Hazard description • The 5 safety rules have to be observed (DIN In all stages of service life, electrical hazards may VDE 0105-1 / DIN EN 50110-1). -
Page 12: Electrical Hazard - Fire
Protection aim only the lamps at the end of the workday. Avoiding the fire and explosion hazard. Figure 5. Rear side UVC-5 Protective measures Only regular maintenance work can prevent the components from burning. When electrical / electronical components are used, there can always be a short circuit igniting the component. -
Page 13: Commissioning
You can switch off the system by pressing switch 3 only after this time has elapsed since there is a risk of heat accumulation. Figure 7. Rear Side of the UVC-5 Conveyor System 5.3 Belt speeds Figure 8. Front Side of the Conveyor... -
Page 14: Height Adjustment
UV bridge (lamp case). Figure 9. All special spare parts can be purchased from Unscrewing the UV bridge DYMAX EUROPE. For this purpose, specify the listed article numbers. BEFORE CARRYING OUT MAINTENANCE AND REPAIR WORK, THE DEVICE MUST BE DISCONNECTED FROM THE POWER... -
Page 15: Disposal Of The Uv Bulbs
(4). Only Do not dump in your normal waste. touch the ends of the lamp (wear cotton gloves). The UV bulbs used by Dymax Europe Figure 11. GmbH are products according to the... -
Page 16: Specifications
7. Specifications Property Specification Dimensions Overall Dimensions 700 mm x 369 mm x 299 mm (W x D x H) Lamp Case 130 mm x 200 mm x 130 mm (W x D x H) Transport Height 15-60 mm Special Design 52-82 mm Weight Lamp Case... -
Page 17: Spare Parts List
Figure 13. UVC-5 Conveyor Dimensions 8. Spare Parts List Please indicate the following on your spare parts orders: • Type designation and serial number of the machine • Component designation • Six-digit article number Item Part Number Tooth lock washer, type 18 Xl 037, Standard 100.204... -
Page 18: Troubleshooting
Replacement Bulb Warranty If the bulb fails to ignite during the warranty period of 500 hours and all bulb history cards for a specific UVC-5 have been returned to Dymax, the bulb will be replaced under warranty. - Page 19 U S E R G U I D E U V C - 5 C O N V E Y O R...
- Page 20 The user should adopt such precautions and use guidelines as may be reasonably advisable or necessary for the protection of property and persons. Nothing in this bulletin shall act as a representation that the product use or application will not infringe a patent owned by someone other than Dymax Corporation or act as a grant of license under any Dymax Corporation Patent. Dymax Europe GmbH recommends that each user adequately test its proposed use and application of the products before actual repetitive use, using the data contained in this bulletin as a general guide.
Need help?
Do you have a question about the UVC-5 and is the answer not in the manual?
Questions and answers