Eaton Cutler-Hammer NTV Series Instruction Bulletin page 26

Instruction Bulletin
Page 26 Effective: June 2003
NOTICE
This instruction booklet is published solely for information
purposes and should not be considered all inclusive.
If further information is required, you should consult the
Cutler-Hammer business.
Sale of product shown in this literature is subject to
terms and conditions outlined in appropriate Cutler-Hammer
selling policies or other contractual agreement between
the parties. This literature is not intended to and does
not enlarge or add to any such contract. The sole source
governing the rights and remedies of any purchaser of this
equipment is the contract between the purchaser and the
Cutler-Hammer business.
NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE
OR MERCHANTABILITY, OR WARRANTIES ARISING FROM
COURSE OF DEALING OR USAGE OF TRADE, ARE MADE
REGARDING THE INFORMATION, RECOMMENDATIONS
AND DESCRIPTIONS CONTAINED HEREIN. In no event
will the Cutler-Hammer business be responsible to the
purchaser or user in contract, in tort (including negligence),
strict liability or otherwise for any special, indirect, incidental
or consequential damage or loss whatsoever, including but
not limited to damage or loss of use of equipment, plant
or power system, cost of capital, loss of power, additional
expenses in the use of existing power facilities, or claims
against the purchaser or user by its customers resulting
from the use of the information, recommendations and
description contained herein.
CSA is a registered trademark of the Canadian Standards
Association. National Electrical Code and NEC are registered
trademarks of the National Fire Protection Association,
Quincy, Mass. NEMA is the registered trademark and
service mark of the National Electrical Manufacturers
Association. Uniform Building Code (UBC) is a trademark
of the International Conference of Building Officials (ICBO).
UL is a federally registered trademark of Underwriters
Laboratories Inc.
O&M Manual for
Non-Automatic Transfer
Switches (30 – 1200 Amperes)
For more information visit: www.cutler-hammer.eaton.com IB01602007E