Dc Input Monitor; Dc Input Voltage Monitor - ABB PVS980-58 Firmware Manual

DC input monitor

DC input monitor supervises DC input voltage and DC input current.
•
The DC input voltage is the voltage measured on the panel side of the DC contactor.
DC input voltage and power can be monitored with parameters
and
208.03 Input
•
The measured DC input current is used for detecting DC input overcurrent and
reverse DC input currents. The power module input currents can be monitored with
parameter
208.04 Input
See also,
DC input specific current monitoring (available with G417 option)

DC input voltage monitor


The module monitors that the voltage on the DC input side is larger than the minimum limit
and smaller than the maximum limit when the inverter starts to operate. The DC input
voltage monitor also checks the polarity of the DC input voltage. If a large negative voltage
is detected in the input a warning is displayed to indicate an improper connection of the
DC cables.
Settings
213.05 Min input voltage for wake-up
213.08 Min input voltage for first start
power.
current.
208.01 Input voltage
on page 40.
Program features 39