Connecting Inverter To Communication Or Fieldbus Network - ABB PVS980-58 Firmware Manual

Fieldbus adapters are available for various communication systems and protocols, e.g.,:
•
CANopen (FCAN-01 adapter)
•
ControlNet (FCNA-01 adapter)
•
DeviceNet (FDNA-01 adapter)
•
EtherCAT® (FECA-01 adapter)
•
EtherNet/IP (FENA-11 or FENA-21 adapter)
•
Modbus/RTU (FSCA-01 adapter)
•
Modbus/TCP (FENA-11 or FENA-21 adapter)
•
POWERLINK (FEPL-02 adapter)
•
PROFIBUS DP (FPBA-01 adapter)
•
PROFINET IO (FENA-11 or FENA-21 adapter).
The cyclic communication between a fieldbus system and the inverter supply unit consists
of 16/32-bit input and output data words.
Note: At the manual release time, only FENA and FSCA are officially supported.
Connecting inverter to communication or fieldbus
network
The inverter is connected to a communication or fieldbus network using a communication
adapter module installed on the BCU control unit of the inverter.
Tabel 9:Communication adapters
that are most commonly used.
Adapter type
FENA-01/-11/-21
FSCA-01
Tabel 9: Communication adapters
For more information, see the adapters user's manual.
182 Communication interfaces
describes the different types of communication adapters
Protocol
Modbus/TCP, EtherNet/IP, PROFINET IO
Modbus/RTU