Electricity Line Construction - KyungDong KDB-101GOM+ Installation Manual

G O M + 표 준 형 - 영 문
4

Electricity Line Construction

Proper Construction of Electrical Lines
Please adhere to the following related national/local standards or rules when
starting the construction for 220V(230V) power supply, connection, and cable.
In the area of 220V(230V), when the power outlet contact is not proper, you are
required to complete a contact construction.
In the area of 110V, the contact construction is required if individual transformer is
done to increase up to 220V(230V).
Please install an outlet exclusively for the boiler. The power outlet must be installed
in a location at least 300mm from the boiler.
Please complete construction of the electric
line to fit the product power supply.
The electricity for the boiler should be 220V
(230V) 50/60Hz. If the supply is higher or lower
than the required voltage, it may cause a fire,
reduce the boiler performance, or decrease use
life of the boiler.
41