Download Print this page

Section 6.1-Care Of The Finish - WILSON AUDIO Convergent Synergy Owner's Manual

Advertisement

Section 6.1—Care of the Finish
The Mezzo Convergent Synergy loudspeaker is hand painted with WilsonGloss™ paint
and hand polished to a high luster. While the finish seems quite dry to the touch, final cur-
ing and complete hardening takes place over a period of several weeks.
Dusting the Mezzo Convergent Synergy
It is important that the delicate paint finish of the Mezzo Convergent Synergy be
dusted carefully with the dust cloth, which has been provided. We recommend that the
following procedure be observed when dusting the speakers:
• Blow off all loose dust.
• Using the special dust cloth as a brush, gently whisk off any remaining
loose dust.
• Shake out the dust cloth.
• Dust the finish, using linear motions in one direction parallel to the floor.
Avoid using circular or vertical motions.
Because the paint requires a period of several weeks to fully cure, we recommend that
no cleaning fluids, such as glass cleaners, be used during this initial period of time. When
the paint is fully cured, heavy fingerprints and other minor smudges may be removed with
a glass cleaner. Always use the dust cloth. Stronger solvents are not recommended under
any circumstances. Consult your dealer for further information if required. To maintain the
high luster of the finish, periodic polishing may be desired. We recommend a nonabrasive
carnauba-based wax and a sof t cloth.
Care of the Grills
Periodically, you will want to clean the Mezzo Convergent Synergy's grills. This is
W i l s o n A u d i o S p e c i a l t i e s
s
6 . 1 — C
f
e C T i O n
a r e O f T h e
i n i s h
65

Advertisement

loading