Table of Contents
Advertisement
Set Up Touch on Your Projector
D-2) Insert 0.2 inch (5mm) thickness gauge at
point 1~9 positions in the following order:
Horizontal:
-Measure point 1, 2 & 3.
-Measure point 4, 5 & 6.
-Measure point 7, 8 & 9.
Vertical:
-Measure point 1, 4 & 7.
-Measure point 2, 5 & 8.
-Measure point 3, 6 & 9.
D-3) If 0.2 inch (5 mm) thickness gauge cannot
be inserted, it means whiteboard flatness
is less than 0.2 inch (5 mm) and capable
for finger touch.
10
Step 2: Installing the Touch
Unit
1 Open top cover by Phillips screwdriver
(model: number 1).
2 Mount base plate to whiteboard or wall.
Keep distance to image area:
- 2.17~5.31 inch (55~135 mm) from bottom
of the base plate
Advertisement
Table of Contents
