AB CRUNCH SIT UP BENCH or Scan code: MODEL# 8642AB If you have an issue with your item, do not return. Please report items that are damaged or missing parts to the manufacturer GQ Brands within three days of delivery. Contact customer To order these parts, or if you have any other questions or concerns service at customerservice@gqbrands.com to open a ticket.
Page 3
13 years. reference. cushion attachments. Check for damage and • NEVER allow more than one person at a time proper stability to ensure that all parts are on this product. correctly positioned, secured for use and in good working order. 8642AB...
PARTS LIST Base Frame Back Frame Ankle Support Attachment Backrest Cushion Foam Rollers 1” Round Caps 2” Round Leg Caps Lock Pin 2” Square End caps 10 - 11 - 12 - 13 - Cushion Bolts M8 - 15mm M8 Washer Frame Bolt M10 - 75mm M10 Washer 14 -...
Page 5
Align the opening at the base of the Ankle Support Attachment to the side openings of the Base Frame. Tighten in place with the Hinge Lock Pin (15) turning it clockwise until the whole Bolt has been inserted into the Base Frame. 8642AB...
Page 6
ASSEMBLY INSTRUCTIONS STEP 3 Align both the Assembled Base Frame and the assembled Back Frame so the upper portions meet. Align the upper openings of both frames. Lock Pin Opening Frame Bolt Opening GQBrands.com CustomerService@GQBrands.com 1-866-498-5269...
Page 7
Lock Pin must pass both openings to safely secure it. Make sure Lock Pin is in place and will not move while in use. Failure to do so may result in injury or damage to the product. 8642AB...
Page 8
ASSEMBLY INSTRUCTIONS STEP 6 Place all 4x Foam Rollers (5) on the arms of the Ankle Support Attachment and the Arms at the top of the frame where they meet. GQBrands.com CustomerService@GQBrands.com 1-866-498-5269...
Page 9
Keep this Lock pin for future use to secure the product in place for each workout. Fold t as shown into the Back Frame. Store away in a secure place to avoid serious injury or damage to the product. 8642AB...
FREQUENTLY ASKED QUESTIONS Question: “I had a part missing from my Question: “One of the parts has broken” or, how do I replace it?” box” or “something was damaged during assembly, can you send it to me?” Answer: If you are still within your warranty period, you should contact customer Answer: If it has been 30 days or less from service.
Need help?
Do you have a question about the 8642AB and is the answer not in the manual?
Questions and answers