AB CRUNCH SIT UP BENCH MODEL# 8642AB PRODUCT MANUAL - VERSION 04.16.03 FOR AGES: WEIGHT LIMIT: 113 Kgs ADULT(S) NEEDED: TOOLS NEEDED: CUSTOMER SERVICE WARNING/ADVERTENCIA • Do not allow more than one person at any time. • The contents of this package are not suitable GQBrands.com...
CUSTOMER SERVICE INFORMATION Thank you for purchasing: AB CRUNCH SIT UP BENCH MODEL# 8642AB At Global Quality Brands®, we want all of our customers to be To order these parts, or if you have any other questions or concerns completely satisfied with their purchase. Please take time to review...
TO USE. ALL MERCHANDISE IS SOLD ON THIS CONDITION, WHICH NO products are not covered by the product warranty. No other warranty REPRESENTATIVE OF GQ BRANDS® CAN WAIVE OR CHANGE. beyond that specifically set forth above is authorized by GQBrands®. MODEL# 8642AB...
WARNINGS IMPORTANT MESSAGE WARNING - PLEASE READ ADULT ASSEMBLY REQUIRED CHOKING HAZARD - Small Parts NOT for children under 3 years of age. WARNING: While every attempt is made to ensure the highest degree of protection in all equipment, we cannot guarantee freedom from injury. The user assumes all risks of injury due to use.
Page 5
Check for damage and proper stability persons over the age of 13 years. to ensure that all parts are correctly positioned, secured for use and in good • NEVER allow more than one person at a working order. time on this product. MODEL# 8642AB...
Ankle Support Attachment Cushion Bolt Washers M8 Backrest Cushion Frame Bolt M10 x 75 Foam Rollers Frame Bolt Washers M10 1” Round Caps Frame Bolt Nut M10 2” Square End Caps Hinge Lock Pin 2” Round Leg Caps MODEL# 8642AB...
Page 8
ASSEMBLY INSTRUCTIONS STEP 1: Locate: 1x Base Frame (1) 1x Back Frame (2) 2x 2” Square End Caps (7) 4x Round Leg Caps (8) 1x Frame Bolt M10*75 (12) 2x M10 Washers (13) 1x M10 Nut (14) 1x Hinge Lock Pin (15) A.
Page 9
Hinge Lock Pin fully engaged. Even with the Hinge Lock Pin in place, always be aware of the location of your extremities, especially your fingers, and keep them clear of this area. Failure to do so may result in serious injury. MODEL# 8642AB...
Page 10
ASSEMBLY INSTRUCTIONS STEP 1: Locate: 1x Ankle Support Attachment (3) 1x Backrest Cushion (4) 4x Foam Rollers (5) 4x 1” Round End Caps (6) 1x Lock Knob (9) 4x Cushion Bolt M8*15 (10) 4x Cushion M8 Washers (11) A. Place 2x 1” Round End Caps (6) into the tube at the top of the Back Frame (2).
Page 11
Once aligned, be careful to not over tighten the bolts. They should be snug and secure, but care must be used especially if using a torque wrench that the bolt holes do not become stripped. MODEL# 8642AB...
FREQUENTLY ASKED QUESTIONS • Question: “Something was missing from • Question: “Is there any maintenance I • Question: “How should I clean my the packaging,” “I need to purchase a need to do for my Bench?” Bench?” replacement part” or “I discovered a Answer: You should clean this equipment damaged piece.
Need help?
Do you have a question about the 8642AB and is the answer not in the manual?
Questions and answers