Advertisement
Quick Links
Advertisement
Related Manuals for Trotec LD6
Summary of Contents for Trotec LD6
- Page 1 OPERATING MANUAL SOUND LOCATOR...
-
Page 2: Table Of Contents
• Do not open the device. • Observe the storage and operating conditions as given in Follow the manual the Technical data chapter. Information marked with this symbol indicates that the operating manual must be observed. sound locator LD6... - Page 3 Do not use the device in potentially explosive atmospheres, for completely. measurements in liquids and at live parts. Trotec accepts no liability for damages resulting from improper use. In such a Caution case, any warranty claims will be voided.
-
Page 4: Information About The Device
Operating conditions -10°C to +50°C Frequency button Storage conditions -20°C to +60°C Micro USB port Dimensions 114 x 35 x 25 (mm) Power button (length x width x height) Illumination LED Weight (device only) 210 g (measuring device) sound locator LD6... -
Page 5: Transport And Storage
200 g Storage Scope of delivery When the device is not being used, observe the following • 1 x Measuring device LD6 with measuring tip (e.g. for storage conditions: water lines, valves) • dry and protected from frost and heat •... -
Page 6: Operation
(battery LED (5) flashes slowly or headphone LED (13) is illuminated in red). To do so, please proceed as follows: 1. Select the charging adapter suitable for the national grid. 3. Connect the USB charging cable to the charger. sound locator LD6... - Page 7 ð Twice the headphones emit an acoustic confirmation signal and the headphone LED (13) flashes slowly in blue. 4. First, turn down the volume of the headphones by pressing the volume button (10, V-). ð An acoustic confirmation signal indicates the current sound level. sound locator LD6...
- Page 8 2. Press the frequency button (6) twice to activate low frequencies. ð The sound level is indicated on the LED bar graph (3) and the sound can be heard through the headphones. ð The LED for low frequencies will be illuminated. sound locator LD6...
- Page 9 Switching the device off 1. Press and hold the power button (8) at the device for approx. 3 s until the LEDs light up briefly. 2. Instead attach for instance the pot magnet to the device. ð The device switches off. sound locator LD6...
-
Page 10: Maintenance And Repair
For further return options provided by us please sure that no moisture enters the housing. Do not use any refer to our website https://de.trotec.com/shop/. sprays, solvents, alcohol-based cleaning agents or abrasive The separate collection of waste electrical and electronic cleaners, but only clean water to moisten the cloth. - Page 11 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...