Download
Share
Print this page
Trotec 3110008001 Operating Manual
  1. Manuals
  2. Brands
  3. Trotec Manuals
  4. Measuring Instruments
  5. 3110008001
  6. Operating manual

Trotec 3110008001 Operating Manual

Sound locator
Hide thumbs

Advertisement

Quick Links

Download this manual
LD6
EN
OPERATING MANUAL
SOUND LOCATOR

Advertisement

loading

Related Manuals for Trotec 3110008001

Summary of Contents for Trotec 3110008001

  • Page 1 OPERATING MANUAL SOUND LOCATOR...

  • Page 2: Table Of Contents

    EU declaration of conformity via the following link: Notes regarding the operating manual......... 2 Safety .................. 2 Information about the device.......... 4 Transport and storage............ 5 Operation ................ 6 https://hub.trotec.com/?id=40313 Maintenance and repair ............ 10 Safety Errors and faults.............. 10 Read this manual carefully before starting or using the Disposal ................ 10 device.
  • Page 3 Do not use the device in potentially explosive atmospheres, for completely. measurements in liquids and at live parts. Trotec accepts no liability for damages resulting from improper use. In such a Caution case, any warranty claims will be voided.

  • Page 4: Information About The Device

    Headphones Information about the device Device description With this device leakage sounds can be transmitted via Bluetooth to the corresponding headphones and rendered audible. The sound level is displayed analogously at the device. Depending on the situation, the device can be operated with a connected tip, extension, tripod or pot magnet.

  • Page 5: Transport And Storage

    Headphones (noise-cancelling) Transport and storage Parameter Value Note Bluetooth frequency 2,402 to 2,480 GHz If you store or transport the device improperly, the Bluetooth version Version 4.0 class 2 device may be damaged. Note the information regarding transport and storage of Supported Bluetooth profiles A2DP, AVRCP, HSP, HFP the device.

  • Page 6: Operation

    2. Plug the charger into a properly fused mains socket. Operation Charging the battery The battery is partially charged upon delivery to avoid damage to the battery caused by a deep discharge. Warning of electrical voltage Before each use of the charger or power cable, check for damages.
  • Page 7 4. Connect the USB charging cable to the device and / or Switching the device on headphones (both devices use the Micro USB system). Info If you have just finished pairing the devices for initial start-up, both the device and the headphones are switched on already.
  • Page 8 Volume control at the headphones Changing the frequency range 1. Press the volume button (10). Upon switch-on the device allows for all frequencies. ð Press V+ to increase the volume or V- to reduce it. 1. Press the frequency button (6) once to activate high ð...
  • Page 9 3. Press the frequency button (6) three times to activate all The following schematic representation provides an overview of frequencies. the possible combinations. You can use one or both extensions as needed. ð The frequency LEDs (2) go out. Exchanging the measuring tip The measuring tip design can vary depending on the surface to be measured or on the medium contained in the conveyor line.

  • Page 10: Maintenance And Repair

    For further return options provided by us please sure that no moisture enters the housing. Do not use any refer to our website https://de.trotec.com/shop/. sprays, solvents, alcohol-based cleaning agents or abrasive The separate collection of waste electrical and electronic cleaners, but only clean water to moisten the cloth.
  • Page 11 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...

This manual is also suitable for:

Ld6