– This is the number of times the AP will restart the authentication
Fail Retries
process with the client before returning an error.
– If this control is checked, the AP will re-initiate
Enable Reauthentication
authentication whenever the specified amount of time has passed.
– If this control is checked, the AP will pass the WEP key
Enable WEP Key Delivery
to the client after the authentication procedure has finished. This only applies when
the AP has WEP enabled, EAP-TLS is being used on the RADIUS server as the
authentication method, and the supplicant has been authenticated with the RADIUS
server.
Accounting Options
Figure 20. IEEE 802.1X panel – Accounting Options
– This is the number of times the AP will attempt to resend accounting
Retries
information to the server before returning an error.
– If this control is checked, the AP will periodically resend
Enable Interim Update
any accounting information to the server. The update time can be set by the user.
Outdoor Access Point
31