Table of Contents
Advertisement
ATM Digital Video Recorder User Manual
Figure 6-2 Local HDD Settings
7. Select a group number for the HDD.
8. Click OK.
Note
Regroup the cameras for HDD if the HDD group number is changed.
9. Go to Storage → Storage Mode .
10. Select group number from the list.
11. Select related camera(s) to save videos and pictures on the HDD group.
12. Click Apply.
6.1.2 Configure the HDD Property
HDD property can be set as R/W, Read-only, or Redundant.
Before You Start
Set the storage mode to Group. For detailed steps, refer to Configure HDD Group
Steps
1. Go to Storage → Storage Device .
2. Click
of desired HDD.
3. Select HDD Property.
56
Advertisement
Table of Contents
