Object Removal Detection - HIKVISION iDS-7200AHQHI-M Series User Manual

3. Select a camera to configure.
4. Check Enable.
5. Optional: Check Save VCA Picture to save the captured defocus detection pictures.
6. Drag the Sensitivity slider to set the detection sensitivity.
Note
Sensitivity range: [1-100]. The higher the value, the more easily the defocus image will be
detected.
7. Set the arming schedule.Refer to Configure Arming Schedule .
8. Set the linkage actions. Refer to Configure Linkage Actions .
9. Click Apply.

4.3.8 Object Removal Detection

The object removal detection function detects the objects removed from a pre-defined region,
such as the exhibits on display, and a series of actions can be taken when the alarm is triggered.
Steps
1. Go to System → Event → Smart Event .
2. Click Object Removable.
ATM Digital Video Recorder User Manual
Figure 4-11 Defocus Detection
43