KKT KOLBE Sinus Insel TC9 Installation Instruction page 7

Lift main body
4
Lift the main body of the cooker hood onto the angle bar and
then fix it into position using the 16×M5 screws and nuts with
metal washers.
IMPORTANT: This stage of the installation process
MUST be completed by two people.
IMPORTANT: The 16×M5 screws MUST be securely tightened.
7
Connect power and slide down the chimney
If you are going to be using the hood in extraction mode,
you should fix the ducting hose to the ceiling. The electrical
connection must correspond to the electrical requirement noted
on the rating plate, which is placed inside the cooker hood.
The appliance should now be connected to the electrical supply.
8