Advertisement
2.
Press the SEAR button on the digital control probe to raise the temperature in the frypan to
260°C. The light next to SEAR on the temperature control probe will begin flashing.
3.
When the frypan has reached the SEAR temperature, the light next to SEAR will become
constant. It will hold that temperature for approximately 3 minutes.
Note: It is not necessary to wait for the frypan to heat to the preset temperature before
selecting SEAR.
4.
Carefully place food to be seared into the frypan. Sear the food on each side for about 1½
minutes.
5.
After about 3 minutes, the temperature on the digital control probe will change to the pre-
set temperature initially selected. (For example, if you select 180°C and then SEAR, the
frypan will return to 180°C after the searing function is complete.)
Note: You can turn off SEAR by pressing the SEAR button again. The frypan will
automatically revert to the preset temperature.
6.
If you have more food to sear, press the SEAR button again and follow steps 2
through 5.
7.
When you have finished searing, you can add more food and continue cooking at your
regular temperature or press the ON/OFF button and unplug the appliance if you are
finished using the frypan.
CARE AND CLEANING
This appliance contains no user-serviceable parts. Refer service to qualified service personnel.
General Cleaning
1.
Unplug the cord and let the frypan cool completely.
2.
Remove the digital control probe from the control probe socket.
3.
To wash the cooking pan, fill with warm, soapy water; wash with a soft cloth or sponge,
rinse, then dry thoroughly. Remove stubborn spots using a soft cloth with a little cooking
oil while the frypan is still warm.
Important: For hard stains, use a sponge or nylon scouring pad with liquid detergent.
Important: Do not use any abrasive cleaners or metal pads as they can damage
the ceramic coating.
4.
The lid can be washed in the dishwasher, top-rack only.
5.
Rinse and dry all parts thoroughly.
6.
Wipe the cooking pan exterior base with a damp cloth and dry thoroughly.
7.
To clean the temperature control probe, wipe over with a slightly damp cloth. Ensure
it is completely dry before using again or storing away.
CAUTION: Do not immerse the digital control probe in water or any other liquid.
CAUTION: After cleaning, always make sure that the digital control probe socket is fully
dry before inserting the temperature control probe, or storing away.
7
Advertisement
