Fujitsu SP1120 Consumable Replacement And Cleaning Instructions page 4

SP1120\1125\1130 Consumable Replacement and Cleaning
Insert the protrusion on the shaft into the slot.
6 .
Attach the shaft.
a. Attach the notch, which is on the brake roller shaft, to the slot on the right then attach the left side of
the shaft.
b. Close the cover.
ATTENTION
Confirm that the brake roller is installed properly. Otherwise, it may cause feeding errors such as paper
jams.
CG00002-291501
Instructions
Notch
Brake Roller
Protrusion
Brake Roller Shaft
4