Organized Living freedomRail Garage 3 Drawer GOBox Assembly Instructions

Contents of Package

Left Side
Right Side
(1) Large
Drawer
Left Side
(2)
Small
Drawers
Left
Sides

Assembling the 3 Drawer GOBox

Step 1: Attach Hanging Brackets

Left Side
Back Edge
Attach Hanging Brackets to Sides using Euroscrews. (If using power drill, set torque to low setting.)

Step 3: Attach Sides

a
b
Lock
(a) Attach Sides to Bottom. (b) Tighten Cams by turning clockwise until snug.
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
freedomRail Garage Assembly Instructions
3 Drawer GOBox
(1) Large Drawer Back
(2) Small Drawer Backs
(3) Drawer Bottoms
2 Small
(2) Small Drawer Fronts
Drawer
left sides
(1) Large Drawer Front
Cam
a
Open
Bottom
Top
(6) Full Extension Drawer Glides
(1) Large
Drawer
Right Side
(2)
Small
Drawers
Right
Sides
(2)
Hanging
Brackets
Right Side
Back Edge

Step 4: Attach Top

(a) Attach Top. (b) Tighten Cams by turning clockwise until snug.
Over
Backing
(3) Handles
Machine Screws
(6)
(For Handles)
(34) Euroscrews
(6) 1 / " Wood Screws
(14) Connector Bolts
(16) Backing Nails

Step 2: Install Connector Bolts

Top and Bottom
Smaller Holes for
Connector Bolts
Install (4) Connector Bolts into small holes on Top and Bottom Panels.
b

Tools Required

Power Drill
#2 Phillips
Screwdriver
#2 Phillips Driver
Hammer
a
Top
1