Organized Living freedomRail 1 Drawer Double Hang Big OBox Assembly Instructions

Contents of Package

(18) Euroscrews
(2)
1 / " Wood Screws
(10) Connector Bolts
(2)
Hanging
Brackets
Drawer Side
Left Side

Assembling the 1 Drawer Double Hang Big OBox

Step 1: Attach Hanging Brackets

Left Side
Back Edge
Attach Hanging Brackets to sides using Euroscrews. (If using power drill, set torque to low setting.)

Step 3: Attach Sides

Lock
(a) Attach Sides to Bottom. (b) Lock Cam by turning clockwise until snug.
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
freedomRail Assembly Instructions
1 Drawer Double Hang Big OBox
Right Side
Left Side
Drawer Back
Drawer Bottom
Drawer Front
Back Edge
Cam
Open
Bottom
Top
(1) Drawer Pull
Drawer Side
Right Side
(2)
(2) Full Extension Drawer Glides

Step 2: Insert Connector Bolts

Right Side
Insert (4) Connector Bolts into small holes on Top and Bottom Panels.

Step 4: Attach Top

(a) Attach Top. (b) Tighten Cams same as in Step 3.
Over

Tools Required

Machine Screws
(For Drawer Pull)
Bottom
Smaller Holes for
Connector Bolts
Power Drill
#2 Phillips
Screwdriver
#2 Phillips Driver
Top
1